Tag Archives: Nordic
Tonight I decided to end the breadboard mess for the MSP430 YWasp by soldering a little nRF24l01+ shield for the Launchpad together. The nRF24l01+ with its external antenna looks somehow impressive on the Launchpad . The Launchpad with the MSP430G2553 is communicating happly with the STM32VL Discovery based YWasp prototype. The nice thing about the […]
All modules (“libnrf24l01“, “libserial“, “libconio” and “libshell“) of “libemb” are fully ported to the MSP430G2553 MCU! Also all tests are working (tested on a Launchpad with an MSP430G2553). The “msp430-port” branch is now deprecated since I merged it back completely to “master“. Thus, STM32 version and MCU version share the same code base. Compiling for […]
Got an other one working this night: an example which shows the MSP430G2553 talk to a Nordic nRF24l01+ module through SPI (on USCI_B). The example just reads out the config register from the nRF and prints it on the serial line. But it includes so far everything needed to communicate with the nRF. And well, […]
I updated the “libnrf24l01″ usage documentation. The articles describes the steps needed with “libnrf24l01″ to use the Nordic nRF24l01+ module in its modes “Shock Burst”, “Enhanced Shock Burst” and “Enhanced Shock Burst with ACK Payload”. Go to “libnrf24l01″ usage documentation “libnrf24l01″ is part of “libemb”
YWasp is a firmware for “airifaying” a serial line over an Nordic nRF24l01+ module connected to a ARM-Cortex-M3 based STM32 micro controller. YWasp currently only supports point-to-point connections. A client and a server YWasp instance could be coupled, and everythin that is written to the serial line of one YWasp is transmitted to the YWasp […]
As noted on DP, Nordic Semiconductor provides an AppNote describing by (code-) example the usage of the ShockBurst mode build into their nRF24L01 radios.